GadgetRatty: Sangoma Launches B600 Series of Analog Voice Cards

This is cache of http://feeds.feedburner.com/~r/voipgadgets/~3/474810783/sangoma-launches-b600-series-of-analog-voice-cards.asp. Cache is the snapshot of article that we took when we index feed.
To see original page click here.
We are not affiliated with the authors of this article and not responsible for its content.

Sangoma Launches B600 Series of Analog Voice Cards

2008-12-04 11:38:09 by Editor in VoIP & Gadgets Blog

Rich has a great interview with Sangoma's VP Sales and Marketing, Doug Vilim about their new B600 Series of Analog voice cards, which can be used in Asterisk-based systems. Apparently, Sangoma's über customizable & modular cards can be a slight cost detriment for those that don't need such modularity.

B600D PCI model.

Here's a teaser from Rich's blog:

What is the reason for these new cards to be introduced?

Some of our OEM customers; those who are building IP PBX appliances Empowered by Sangoma, often do not require the modularity, port customization and single slot expandability that our A-Series analog cards provide. Also, four PSTN lines and one fax connection is a common configuration that creates economies of scale, which can lead to a substantial cost savings for these customers when purchasing in larger volumes.

Read full story

Also, here are the specs:

4 ports of FXO and 1 Port of FXS.
Support for Asterisk^®, FreeSWITCH^™, Yate^™, trixbox^™, and PBX/IVR projects, as well as other Open Source and proprietary PBX, Switch, IVR, and VoIP gateway applications.
Single synchronous PCI interface for all ports.
Dimensions: 2U Form factor: 140 mm x 55 mm for use in restricted chassis.
Includes both standard and short half-height compatible mounting clips for installation in 2U rack-mount servers.
32 bit bus master DMA data exchanges across PCI interface at 132 Mbytes/sec for minimum host processor intervention.
Autosense compatibility with 5 V and 3.3 V PCI busses.

Fully PCI 2.2 compliant, compatible with all commercially available motherboards, and shares PCI interrupts.
Power: 3.6 W (0.3A @ 12 V) and 1.65 W (0.5A @ 3.3 V).
Temperature range: 0 - 50°C.
Cables are included.
Suports Fax: Single FXS Port designed for optimum fax support.
Sangoma B600 cards synchronize perfectly with Sangoma's T1/E1 cards and the PSTN clock for error-free fax and modem passthrough over T1 lines.
Optional: DSP Echo Canceller
G.168-2002 echo cancellation in the hardware.
1024 taps/128 ms tail per channel on all channel densities.
DTMF decoding and tone recognition.
Voice quality enhancement: music protection, acoustic echo control and adaptive noise reduction.
No CPU load as a result of echo cancellation.
No additional slot is required.